Everett, Washington Plumbing Local Permit Ordinances and Codes
City Building Department (Authority Having Jurisdiction)
The City of Everett's Permit Services division is the Authority Having Jurisdiction for plumbing permits. They are located at 2930 Wetmore Ave, 2nd Floor, Everett, WA 98201. You can contact them by phone at (425) 257-8810 or by email at [email protected].
Local Zoning and Fee Nuances
Everett, Washington, follows the 2021 building code, including the 2021 Uniform Plumbing Code (UPC). Generally, a permit is required for adding new plumbing fixtures, replacing water heaters, or rerouting plumbing lines. Replacing a fixture in the same location typically does not require a permit.
Permit fees vary based on the scope of work. For example, fees can range from $35-$140 for adding a new fixture, $37-$112 for water heater replacement, and $75-$300 for rerouting plumbing lines. Specific fee schedules for plumbing and mechanical permits are available on the City of Everett's website. A 2.3% credit card convenience fee is applied to all credit and debit card transactions.
While specific zoning nuances for plumbing permits are not detailed in the provided search results, it is important to note that zoning requirements (such as setbacks, lot coverage, and height limits) are separate and vary by location. It is always recommended to confirm these with the local building and planning departments before starting a project. The City of Everett has also adopted the Everett 2044 comprehensive plan and development regulation updates, which may include changes to zoning maps and codes, with an effective date of July 8, 2025.
Resources to Learn More
Because Everett is located within Snohomish County, the following broader county regulations may also apply to your project:
Washington, Snohomish County Plumbing Permit Regulations and County Ordinances for Unincorporated Areas
Snohomish County Plumbing Permit Requirements
Snohomish County requires permits for any work performed on water supply or drainage systems. This applies to both residential and commercial properties, including those in unincorporated areas. Property owners can perform plumbing work on their own property by obtaining the appropriate permit, but must comply with the Uniform Plumbing Code (UPC).
Building and Safety Jurisdiction
Snohomish County's Planning and Development Services (PDS) department handles building and safety, including plumbing permits. For commercial projects, separate permits are required for building, mechanical, and plumbing work. For residential projects, plumbing work is typically included in a Residential Building Permit (RBP) if it involves more than just adding or relocating fixtures. Otherwise, a Residential Plumbing Permit (MP) is needed.
Rules for Unincorporated Areas
Properties in unincorporated Snohomish County follow the same permit requirements as those within incorporated cities, as determined by the county's Planning and Development Services. It is important to verify if a property is within city limits or in unincorporated county jurisdiction, as mailing addresses can be misleading. Property taxes paid to the county, rather than a specific city, indicate unincorporated status.
Permit Types and Requirements
- Residential Plumbing Permit (MP): Required for any work on water supply or drainage systems in single-family homes and duplexes. This includes adding, relocating, repairing, or replacing fixtures.
- Residential Building Permit (RBP): Required if the plumbing work involves more than adding or relocating fixtures. Plumbing work should be included in the RBP if applicable.
- Commercial Plumbing Permit (KP): Required for plumbing work in commercial buildings, multifamily residential buildings, and townhouses. This permit is separate from the Commercial Building Permit (CBP) and Commercial Mechanical Permit (KM).
- Plan Review: May be required for new building additions or commercial projects, depending on the scope of work. Plans must comply with specific submittal requirements.
- Inspections: Plumbing systems, including under-slab plumbing, must be tested for leaks and approved by an inspector before being concealed.
- Contractor Licensing: If hiring a plumber, ensure they have a valid contractor license. Property owners may be liable for work done by unlicensed contractors.
Exemptions
Certain minor plumbing repairs may be exempt from requiring a permit, such as repairing leaks that do not involve removing traps or drain pipes, or clearing stoppages that do not require valve, pipe, or fixture replacement or rearrangement. However, even if a building permit is exempt, other permits or approvals may still be necessary, and all work must comply with building codes and setback requirements.
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Washington:
Washington Plumbing Legislation, Codes, and Guidelines
Plumbing Codes and Legislation in Washington State
The state of Washington regulates plumbing systems through the adoption of the 2021 Uniform Plumbing Code (UPC), which is published by the International Association of Plumbing and Mechanical Officials (IAPMO). This model code is adopted by reference and modified by state-specific amendments to create the Washington State Plumbing Code, codified under Chapter 51-56 of the Washington Administrative Code (WAC). These regulations are established under the authority of the Revised Code of Washington (RCW) Chapter 19.27, which governs the State Building Code.
Primary State Agencies
Two primary state entities oversee the plumbing regulatory framework in Washington:
- Washington State Building Code Council (SBCC): This council is responsible for the adoption, maintenance, and amendment of the state building codes, including the Washington State Plumbing Code. They regularly review and update these codes to ensure they remain consistent with state safety and health standards.
- Washington State Department of Labor & Industries (L&I): This department is the primary authority for the administration of plumber certification, plumbing contractor licensing, and enforcement of professional standards. While the SBCC sets the technical code, L&I manages the workforce and business regulations associated with the plumbing trade, as outlined in RCW Chapter 18.106 and WAC Chapter 296-400A.
It is important to note that while the state sets the minimum standards, local jurisdictions (cities and counties) are responsible for issuing permits and conducting inspections. Local authorities may also adopt additional, stricter amendments to the state code.
Resources to Learn More